Kodak HERO 4.2 User Manual

www.kodak.com/go/aiosupport 65
KODAK HERO 4.2 All-in-One Printer
Changing the number of copies of a document
1. Place the original document in the ADF or on the scanner glass (see Loading
originals, page 47).
2. Press .
3. Touch
Copy Document.
4. Touch or to select a number.
5. Press to begin copying.
Enlarging or reducing the size of a copy
1. Place the original document on the scanner glass (see Loading originals,
page 47).
2. Press .
3. Touch
Copy Document, then touch Options.
4. Touch
Copy Size, then touch Choose Percentage.
5. Touch an enlargement or reduction percentage, then touch
OK.
6. Press to begin copying.
Darkening or lightening a copy
1. Place the original document in the ADF or on the scanner glass (see Loading
originals, page 47).
2. Press .
3. Touch
Copy Document, then touch Options.
4. Touch , then touch
Lighter/Darker.
5. Touch to select a number below zero for a darker copy, or press to select
a number above zero for a lighter copy.
6. Press to begin copying.

Kodak HERO 4.2 Specifications

General

Brand	Kodak
Model	HERO 4.2
Category	All in One Printer
Language	English