Kodak HERO 4.2 - Scanning to a Computer

www.kodak.com/go/aiosupport 77
KODAK HERO 4.2 All-in-One Printer
Scanning to a computer
1. Lift the scanner lid, and place the original face down in the right-front corner of
the scanner glass, then close the lid.
2. Close the lid.
3. Press .
4. Touch
Scan.
5. Touch
Computer, then touch the setting/option you want to change.
Scan
Option
Settings
Description
Scan To USB-connected
Computer
(default)
The scanned file is sent to the USB-connected
computer.
Name of computer
(only if a computer is
connected by
wireless or Ethernet
network)
The scanned file is sent to the computer on the
wireless or Ethernet network.
Scan What Document
(default)
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the control panel, page 73).
Photo
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the control panel, page 73).