Faxing
92 www.kodak.com/go/aiosupport
Fax Speed Fast (33.6K) (default)
Medium (14.4K)
Slow (9.6K)
Use this setting to reduce the fax
transmission speed of your printer. If you
are having difficulty sending or receiving
a fax or if your fax works intermittently,
then reducing the fax speed to Medium
or Slow may resolve the issue. If you are
using Vonage or Magic Jack, we
recommend that you set the fax speed to
Slow.
Redial if No Answer Yes (default) / No If the fax number you call does not
answer, the printer will redial the number
automatically one time.
Busy Redial
Attempts
0 to 12
(default is 5)
The number of times that the fax will
attempt to redial a busy number.
Disable Call Waiting No (default) / Yes If you have call-waiting service on your
phone line, you can disable it so that an
incoming call does not interrupt your fax
transmission.
Select
Ye s
to disable call waiting, then
enter the Call-Waiting Disable Code
(below).
NOTE: You must enable call waiting
manually after your fax
transmission.
Call-Waiting Disable
Code
*70 (default) The printer automatically dials the
Call-Waiting Disable Code before dialing
the number to which you are sending a
fax. This code disables call waiting for
the duration of the fax, preventing
incoming calls from interrupting your fax
transmission.
The usual code to disable call waiting is
the default *70. If the call waiting disable
code is different in your area, touch
Call-Waiting Disable Code, then touch
the backspace button to erase the
current code. Use the keypad to enter
the correct code, then press
OK.
Fax Setting Options Description
To Next Page
Loading...
