2-2 A-61816 January 2016
Installing the Kodak Driver
Software: Linux operating
systems
Linux drivers can be found on the Kodak Alaris website. Visit
www.kodakalaris.com/go/IMsupport to obtain the most recent Linux
drivers and installation procedures.
Install the driver software before connecting the scanner to your PC.
NOTES:
• Depending on the operating system you are installing on (Ubuntu,
Fedora, or SUSE) the installation procedures may be slightly
different.
• Kodak Scanner software requires QT3. Verify that your system has
these installed (e.g., Fedora: Applications>Add/Remove
Software).
• You must be a super user to install the software.
Installing the Kodak Driver
Software: Macintosh
operating systems
Macintosh drivers can be found on the Kodak Alaris website. Visit
www.kodakalaris.com/go/IMsupport to obtain the most recent
Macintosh drivers and installation procedures.
Install the driver software before connecting the scanner to your PC.
NOTE: Depending on the operating system you are installing on (10.8,
10.9, 10.10) the installation procedures may be slightly different.
Installing the input tray Install the input tray as shown below:
To Next Page
Loading...
