3-12 A-61837 June 2015
Displaying the Operator
Log
The Operator Log provides error code information, such as the time the error
occurred, the error code and a brief description of the error.
The messages that are displayed in the log are only those messages that have
occurred since the scanner was powered on. When you turn the power off or
the scanner goes into Standby or Low Power mode, the Operator Log on the
Operator Control Panel will be cleared.
Displaying scanner
Information
The Information screen provides information about your scanner
(e.g., Firmware Version Number, Scanner Serial Number, Total Pages
Scanned, etc.).
To Next Page
Loading...
