A-61837 June 2015 3-13
Diagnostics The Diagnostics function provides the following options:
•Print Test
• Count Only
• Count Only - Multifeed
• Patch Test
• UDDS Calibration
• Alterations
See the sections that follow for a description of these options.
Performing a Print test The print test checks to be sure the ink jets in the optional Enhanced Printer
are working properly.
1. Select Print Test. The Print Test screen will be displayed.
2. Place a blank sheet of paper in the input elevator.
3. Press the Start/Pause button. The document in the output tray will display
the results of the print test.
4. Remove the document from the output tray and evaluate the appearance
of the test pattern.
• If the pattern is complete, you are ready to begin.
To Next Page
Loading...
