3-20 A-61837 June 2015
Automatic Elevator When this option is On, the input elevator will automatically raise to the feeding
position when paper is added to an empty input elevator.
1. Select Automatic Elevator on the Settings screen.
2. Select Off or On.
3. Press the Select button, then press the Go Back (X) button to return to the
Settings screen.
Changing the volume The Volume screen allows you to adjust the volume of the sound the scanner
will make when a scanner condition is encountered. Options are: High
(loudest), Medium, Low (quietest) or Off (no sound). The default is Off.
1. Select Volume on the Settings screen.
2. Select the desired Volume option.
3. Press the Select button, then press the Go Back (X) button to return to the
Settings screen.
To Next Page
Loading...
