A-61837 June 2015 3-15
Count Only You may want to count the number of documents entering the scanner without
actually scanning them.
NOTE: You can also count pages without having a host PC attached to the
scanner.
1. Select Count Only.
The Count Only Test screen will be displayed.
2. Place the documents you want to count in the input elevator and press the
Start/Pause button. When the scanner has scanned all documents, the
total number will be displayed in the Status area.
3. Press Stop to return to the Diagnostics screen.
NOTES:
• When you press the Stop button, the feeder and transport will stop. You can
continue your Count Only test by pressing the Start button.
• Multifeed Detection is not enabled in Count Only mode.
To Next Page
Loading...
