Printer Overview
11
Loading photo paper
The paper tray capacity is 70 sheets of photo paper.
To load photo paper:
1 Raise the output tray, and pull out the paper tray.
2 Remove any paper from the tray.
3 Insert the paper (short side first) into the tray with the logo side facing up and the
glossy side down.
IMPORTANT: If the photo paper is loaded the wrong way, the ink on your
pictures will be wet and the image quality will be affected.
4 Move the paper forward until it stops.
5 Move both the left and front paper-edge guides until they touch the paper.
6 Push in the paper tray until it clicks into place, and lower the output tray.