Basic Functions
21
Faxing
Before sending or receiving faxes, make sure that a wall phone line is plugged into the
Line in port on the back of the printer.
Sending faxes
To send a fax:
1 Press Fax.
2 Enter a fax number using the numeric keypad.
3 Place the original(s) in the automatic document feeder or on the scanner glass.
IMPORTANT:
Do not load photographs, cards, or any paper stock heavier than
24 lb / 90 gsm or lighter than 16 lb / 60 gsm in the ADF
.
4 Press Start Black to send a black-and-white fax, or press Start Color to send a
color fax.
Receiving faxes
To receive a fax:
1 Load plain paper into the printer.
2 Make sure the Auto Answer LED is on. (If not, press Auto Answer to turn it on.) The
printer will receive all incoming faxes automatically.
NOTE: You can receive an incoming fax manually, even if the Auto Answer is turned on.
When you hear the phone ring, press
Start Black
or
Start Color
.
For more information about faxing, see the Extended User Guide at
www.kodak.com/go/hero6_1manuals.
To Next Page
Loading...
Need help?
General
