12 Customer Support: http://www.pandigital.net/kodaksupport
Safely Disconnect the Scanner from PC
1. On the WINDOWS System Tray, click the hardware removal icon as indicated below.
2. Click the ‘Safely remove USB mass Storage device’ message with the corresponding Drive.
3. When the ‘Safe to Remove Hardware’ message appears, you can safely remove the scanner’s USB cable.
Scan PC Software for KODAK Personal Photo Scanners
With the Scan PC Software for KODAK Personal Photo Scanners (Scan PC Software), you can easily scan photos and save the
scanned pictures directly to the connected PC.
System Requirements
Operating system: WINDOWS, XP, VISTA, WINDOWS 7 - 32-Bit
(The Scan PC Software is not supported on the MAC OS)
10MB free hard disk space
For WINDOWS 7 Users
When the PC recognizes the scanner with an inserted SD Card, WINDOWS
EXPLORER opens.
1. Select
KODAKSCN drive in EXPLORER window.
2. Open
PHOTO1 folder to view your scanned photos.
For MAC Users
When the computer recognizes the scanner with an inserted SD Card, an
icon appears on the desktop; double-click it to open a Finder window.
1. Double-click the
KODAKSCN icon on the desktop.
2. Open
PHOTO1 folder to view your scanned photos.
Scanned Picture Naming Convention
After your first scan, a folder titled PHOTO1 is added to the memory card file structure.
The scanned pictures will be saved in the
PHOTO1 folder. Each scanned picture is given a file name with the prefix EK_
followed by a 4- digit sequential number in the order the pictures are stored. For example,
EK_0001.jpg, EK_0002.jpg.
If the file name reaches
EK_9999.jpg in the PHOTO1 folder, a new folder titled PHOTO2 will automatically be created to
store subsequent new files, and so on.
There can be up to 9 folders (
PHOTO1..9, EK_0001... EK_9999) on a memory card. If exceeded, the Status/Card
indicator light blinks.
You can now view or edit the files on the memory card using your own photo editing software.
Hardware Removal Icon
To Next Page
Loading...
