Customer Support: http://www.pandigital.net/kodaksupport 13
Using the Scan PC Software
CAUTION: To maximize memory usage, close all other applications programs before scanning multi-image filmstrips.
After your first scan, a folder titled PHOTO1 is added to the file structure as follows:
~ Memory Card: \PHOTO1
~ Scan to PC: WINDOWS 2000 and XP: C:\Documents and Settings\(your username)\My Documents\My Pictures\PHOTO1
WINDOWS VISTA or WINDOWS 7: C:\Users\(your username) \Pictures\PHOTO1
You can click the
button to select a different location if desired.
4. Scan your original as instructed beginning on page 8.
5. The scanned picture will be saved to the location you selected in step 2 above.
Each scanned picture is given a file name with the prefix
EK_ followed by a 4- digit sequential number in the order the
pictures are stored. For example,
EK_0001.jpg, EK_0002.jpg.
If the file name reaches
EK_9999.jpg in the PHOTO1 folder, a new folder titled PHOTO2 will automatically be
created to store subsequent new files, and so on.
Note: There can be up to 9 folders (
PHOTO1..9, EK_0001... EK_9999) on a memory card. If exceeded, the
Status/Card indicator light blinks.
Launch Scan PC Software Manually
Uninstall the Scan PC Software
1. From the PC Start menu, select All Programs > Scan PC Software > Uninstall.
2. Follow the uninstall wizard to uninstall the software.
3. Restart your PC when prompted to do so.
If you choose to restart later, be aware that the
Scan PC Software uninstall will not be completed until you restart
the PC.
Install Scan PC Software
1. Connect the scanner to your PC (see page 10), using the KODAK MICROSD
Mobile Card
in the SD adapter (included with scanner).
2. In the Install window, select
Scan PC for KODAK Personal Photo Scanners, and
then click
Install.
3. In the Install Wizard window, click
Next.
4. Click
Next to install in default location, or select desired location and then click
Next.
5. In the Ready to Install window, click
Install.
6. After the software is installed, click
Finish.
Once installed, the
Scan PC Software runs automatically upon PC startup, and the icon stays on the system tray.
If you want to close the
Scan PC Software temporarily, right-click on the icon and select Exit.
1. When the scanner is connected via USB cable to the PC, the Status/Card
light will be blinking. The
Scan PC Software window will appear.
2. Specify the location where you want the scanned pictures to be saved:
~ Memory Card
~ Scan to PC
3. Click
Apply; the window will close.
Double-click the
icon on the Desktop, or right-click the icon in the system tray and select Setting.
If you want to close the Scan PC Software temporarily, right-click on the icon and select Exit.
To Next Page
Loading...
