EasyManuals Logo

Kodak PRINTOMATIC User Manual

Kodak PRINTOMATIC
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
3. BATTERY CARE AND CHARGING
Please carefully read and follow these guidelines.
– Your KODAK PRINTOMATIC camera is equipped with a built-in, non-removable 7.4V lithium ion battery.
– To maximize battery performance and life, we recommend that upon irst use you allow the battery
to fully discharge before recharging it.
– To charge your camera, plug it into a wall outlet using the included micro USB cable and any wall
adapter rated for 1 Amp. The battery LED indicator will blink red until the battery is fully charged.
– Your KODAK PRINTOMATIC may take up to 2 hours to fully charge.
– Avoid extremely cold environments as low temperatures can shorten the battery life and reduce
camera performance. Batteries should not be exposed to excessive heat, such as sunshine, ire or
the like.
– Do not disassemble the camera or remove the battery at any time. The battery is not designed to be
removed from the camera, or charged outside the camera. There is a danger of explosion if battery
is incorrectly replaced, and should be replaced only with the same or equivalent type.
Please contact our support team for service.
– When the battery power dips below 10%, the battery LED indicator will glow red and the camera will
not print. At 2% power, your camera will automatically shut o.
– Please be sure to dispose of the camera device and battery at a properly designated recycling
center in your local area.
C&A Marketing UK Ltd is a registered producer of battery and accumulator products
(Registration No. BPRN06318) and of electrical and electronic products
(Registration No. WEE/ JK4235XX) in the U.K. For more information on proper disposal, please
contact our support team.
Lithium ion batteries may cause environmental harm if disposed incorrectly.
– For optimal performance, use your KODAK PRINTOMATIC in temperatures between 60°F and 90°F
(15.6°C and 32.2°C) and between 20% to 80% relative humidity.
– During extended use, your camera may feel warm to the touch. This is a normal operating
occurrence and does not indicate any product defect or reason to slow down the fun.

Other manuals for Kodak PRINTOMATIC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kodak PRINTOMATIC and is the answer not in the manual?

Kodak PRINTOMATIC Specifications

General IconGeneral
Image Sensor10 MP
Print Size2x3 inches
TypeInstant Print Camera
Film TypeZINK Photo Paper
Print TechnologyZINK Zero Ink Technology
StorageMicroSD card up to 32GB
BatteryLithium-ion rechargeable
ConnectivityUnknown

Related product manuals