Setting Up Your Kodak ScanMate i1120 Scanner to Work with DYMO File
4 © 2008 Newell Rubbermaid. All Rights Reserved
6 Click Settings to open the dialog box pictured below.
7 Under Setting Shortcuts, select either of the OCR (Optical Character Recognition)
options: Black and White Document (OCR Quality) or Color Document (OCR
Quality).
8 Under Input document is, select either One Sided or Two Sided.
9 Do one of the following:
• If you selected One Sided, click OK and then confirm and save your change,
optionally with a new name for the setting.
• If you selected Two Sided, read the next section, “Adding Settings for Two-Sided
Scanning.”
Adding Settings for Two-Sided Scanning
The ScanMate i1120 scanner provides Blank Image Detection, which is useful for two-
sided DYMO File scanning under two circumstances:
• If DYMO File users will sometimes scan one-sided documents and sometimes scan
two-sided documents, a single smart touch shortcut with Blank Image Detection
turned on can serve both needs.
• If two-sided DYMO File scanning is done with a cover sheet in front of each
document to be scanned, instead of a DYMO Label barcode attached to the first page
of each document, Blank Image Detection can ensure that the back of the cover sheet
is not included in the scanned file.
Settings button
One Sided or
Two Side d
OCR Quality
options
To Next Page
Loading...
