DYMO File Setup
© 2008 Newell Rubbermaid. All Rights Reserved 5
The following procedure for specifying two-sided settings picks up after step 8 of the
previous procedure.
To enable Blank Image Detection
1 If you selected Two Sided in step 8 on page 4, click Settings to open the dialog box
pictured below.
2 Select the Enhancements tab.
3 Under Blank Image Detection, select On.
4 Set the Delete if file size is less than value to 5.
5 Click OK and then confirm and save your settings and close all ScanMate i1120
dialog boxes.
DYMO File Setup
On each user’s computer, DYMO File needs to know how the ScanMate i1120 scanner is
connected and which location to monitor for scanned documents to be processed.
You have two options in DYMO File for providing connection and location information:
• Option One: First Run Wizard (automatic for first-time users)
• Option Two: DYMO File Settings (quicker if you have already run the
First Run Wizard)
Settings
button
Enhancements
tab
Blank Image Detection
turned On
Delete if file size is
less than 5KB
To Next Page
Loading...
