Kodak VERITE 64 series - Install ink cartridges

Install ink cartridges
Install ink cartridges to ink cartridge holder
1 Remove the black and color ink cartridges from packaging.
BLACK
COLOR
Black Color
2 Remove the plastic tape on the black and color ink
cartridges using the red pull tab.
DO NOT TOUCH
●
DO NOT TOUCH the gold contact area on the back or
the metal nozzles on the bottom of the cartridge.
3 Lift the Ink door to access the cartridge slot.
1
2
4 Press front side blue Cartridge tab with 2 fingers to open the
cartridge slot.
P
r
e
s
s
!
P
r
e
s
s
!
5 Slide the color ink cartridge all the way into the right slot
using the green rail.
S
l
i
d
e
S
l
i
d
e
S
l
i
d
e
S
l
i
d
e
S
l
i
d
e
S
l
i
d
e
Color(Right)
Black(Left)
6 Slide the black ink cartridge all the way into the left slot using
the green rail.
7 Push and click the center green Cartridge tab to close the
cartridge slot until the cover snaps securely into position.
C
l
i
c
k
!
C
l
i
c
k
!
8 Close the Ink door.
CAUTION
Ink Cartridge Not Inserted Correctly!
●
If the Ink door does not close properly, the ink
cartridges are not inserted correctly. Remove the ink
cartridges and then correctly insert them again.
CLOSE: use only GREEN part.
OPEN: use only BLUE part.
Green
Blue
DO NOT PUSH the green/blue
parts at the same time.
12
English
Continued on next page.