WPS PIN
1 Click [WPS PIN].
2 Connect up the Unit to your PC.
3 Enter Wireless PIN code password.
4 Click [Continue].
Note(s)
●
When performing Network connection, make sure the unit
is not placed too far away from the access point/router and
the access point/router is powered On and its settings are
correct.
If you need additional help on Network problems, visit our
website at www.kodakverite.com/support
●
If there are multiple printers on the Network, the window
below will appear.
–
Select your printer's serial number and click [Next].
Changing connection from USB to Wi-Fi
USB always has priority.
If you would like to change connection from USB to Wi-Fi, refer to
the following instructions.
Microsoft
®
Windows
®
1 Disconnect the USB cable between this unit and your PC
first.
2 From the Windows® start menu, select [All apps]
> [KODAK
VERITE 64] > [Device setting].
3 Click [Printer re-search] in the [Device setting] window.
4 Change the connection type automatically.
Apple Mac OS
1 Disconnect the USB cable between this unit and your PC.
2 Activate [System Preferences].
3 Click [Printers & Scanners].
4 Click [+] > [Add printer or Scanner...].
19
English
Continued on next page.
To Next Page
Loading...
