Settings
You can set up the unit as you like depending on your needs.
–
From the Start Menu, activate [Device setting].
Wi-Fi Setup
You can set the following Wi-Fi settings.
–
Click [Wi-Fi setup].
Network and Password
If you would like to connect to a router manually, follow the Steps
below.
1 Click the SSID you would like to connect.
2 Enter Password and click [Connect].
IP Address
1 Click [IP Address].
2 Select [Auto] or [IP address].
[Auto] DHCP (Dynamic Host Configuration Protocol) mode
It's easy to Automatically get the IP address of this unit from the
Network.
[IP address] Static mode
Set the Network address manually.
3 If you select [Manual], set the items below.
●
IP Address
●
Subnet Mask
●
Default gateway
●
DNS address
4 Click [Save].
40
English
Continued on next page.
To Next Page
Loading...
