Kodak VERITE 64 series - Status messages and LED behaviors

Status messages and LED behaviors
The Status information will report problems with the unit. Take the proper action by referring to the following table.
»
Refer to “Check print status from your PC” on page 26.
Black ink LED
——
Color ink LED
Paper jam LED
Wireless LED
ECO LED
Power LED
indicated by
——
indicated by
——
indicated by
——
——
indicated by
——
——
indicated by
—
——
indicated by
——
LED lighting patterns
Blinking 1
Lights up for 1 sec.
No light for 1 sec.
Blinking 2
Lights up very rapidly
No light for more
than 1 sec.
Blinking 3
Blinking very rapidly 2 times
No light for 1
sec.
Blinking 4 Blinking very slowly
Blinking 5 Blinking slowly
Blinking 6 Blinking rapidly
Blinking 7 Blinking very rapidly
Blinking 8
Blinking very rapidly 4 times
No light for 2
sec.
Blinking 9 Blinking slowly (in Power-On mode)
LED behaviors Status messages Unit status or possible causes Refer to
and
blink as pattern 1
Scanner Error:
Unplug and replug
the power cable.
Unplug the AC plug.
–
Wait at least 30 seconds, then reconnect the AC plug back
into the AC socket.
●
If this error occurs occasionally, visit our website at
www.kodakverite.com/support for the latest
troubleshooting.
●
If you cannot solve the problem, disconnect the AC
plug and contact an Authorized Service Center.
“Hard Reset” on
page 52.
and
blink as pattern 1
Memory Error:
Unplug and replug
the power cable.
Unplug the AC plug.
–
Wait at least 30 seconds, then reconnect the AC plug back
into the AC socket.
●
If this error occurs occasionally, visit our website at
www.kodakverite.com/support for the latest
troubleshooting.
●
If you cannot solve the problem, disconnect the AC
plug and contact an Authorized Service Center.
“Hard Reset” on
page 52.
and
blink as pattern 1
Wi-Fi Module
Error:
Unplug and replug
the power cable.
Unplug the AC plug.
–
Wait at least 30 seconds, then reconnect the AC plug back
into the AC socket.
●
If this error occurs occasionally, visit our website at
www.kodakverite.com/support for the latest
troubleshooting.
●
If you cannot solve the problem, disconnect the AC
plug and contact an Authorized Service Center.
“Hard Reset” on
page 52.
59
English
Continued on next page.