Kodak VERITE 64 series - Page 32

Save changes
1 Click on [Presets] list box, and select [Save Current
Settings as Preset...]. The saved configuration information
will be managed by names.
2 Input name in [Preset Name:] textbox, then select [Preset
Available For:] radio button.
3 Click on [OK] to save and close the window.
4 Select [Cancel] to close window without saving.
Load settings
●
You can access the saved settings quickly by selecting a name
from [Show Presets...] in [Presets] list box.
Change Print options
●
In the Print Setting menu, select the Print options you want to
change in the red frame below.
Preview
Auto Rotate:
Automatically selects portrait or landscape.
Scale:
Enter the scaling ratio.
Scale to Fit:
Input the scaling ratio of [Print Entire Image] or [Fill Entire
Paper] automatically.
Copies per page(s):
Print multiple copies of the page(s).
Layout
Pages per Sheet:
Print multiple pages on one sheet.
Layout Direction:
If you print multiple pages on a sheet, select the layout direction.
Border:
Print the border on the sheet.
Reverse page orientation: If you would like to reverse page
orientation, select the checkbox.
Flip horizontally:
If you would like to flip horizontally, select the checkbox.
Paper Handling
Pages to Print:
If you would like to print odd/even pages only, select [Odd only] or
[Even only].
Page Order:
If you would like to print in reverse order, select [Reverse].
Scale to fit paper size:
If you would like to scale to fit your printer paper, select the checkbox
and select [Destination Paper Size].
Destination Paper Size:
Select the paper size to scale.
Scale down only:
If you don’t want to scale up, select the checkbox.
32
English
Continued on next page.