OPERATORS MANUAL
12 19JAN99 – 7C8770
Table 1 Setting Replenishment Flow Rates
* If sensitometry does not stay within control limits, flooded replenishment may be needed. Contact your Kodak
Representative to order and install the Flooded Replenishment Kit, Part No. 419779.
Note
Refer to Service Bulletin 30, Part No. 632661, for additional information and the latest processing recommendations.
Film Size Processed Use Condition
Average Amount of Film
per 8 Hours of Processor
Operation
Replenishment Flow Rate,
mL per 35 x 43 cm
34 seconds for Standard Cycle
25 seconds for Rapid Cycle
Developer Fixer
Only roll films 35 cm wide High 105 Linear feet or more 50 70
Medium 35 to 105 linear feet 65 85
Low 35 linear feet or less* 80 100
Only 35 x 35 cm film High 90 sheets or more 50 70
Medium 30 to 90 sheets 65 85
Low 30 sheets or less* 80 100
Average size intermix film High 115 sheets or more 50 70
Medium 40 to 115 sheets 65 85
Low 40 sheets or less* 80 100
Only 35 x 43 cm film High 75 sheets or more 60 85
Medium 25 to 75 sheets 80 100
Low 25 sheets or less* 100 120
To Next Page
Loading...