What to do if the starter or starter solenoid is inoperative on my Kohler 12EFKOZD Portable Generator?
If the starter or starter solenoid is inoperative on your Kohler Portable Generator, replace the starter or starter solenoid. The cause is an inoperative starter/starter solenoid.
What to do if the oil level is low in my Kohler Portable Generator?
If the oil level is low in your Kohler Portable Generator, restore the oil level and inspect the generator set for any oil leaks. The reason for this is that the oil level is low.
How to replace a fuse on a Kohler Portable Generator?
To replace a fuse on your Kohler Portable Generator, use fuses of the same ampere rating and type (for example: 3AB or 314, ceramic). Do not substitute clear glass-type fuses for ceramic fuses.
How to fix a faulty ground connection on my Kohler Portable Generator?
If you find a faulty ground connection in your Kohler Portable Generator, clean and retighten the connection. The cause is a faulty ground connection.
What to do if the transfer switch test switch is in the OFF position on my Kohler Portable Generator?
If the transfer switch test switch is in the OFF position on your Kohler Portable Generator, move the transfer switch test switch to the AUTO position. This is because the transfer switch test switch is in the OFF position.
How to secure a loosely installed exhaust system on my Kohler 12EFKOZD?
If the exhaust system of your Kohler Portable Generator is not securely installed, inspect the exhaust system and tighten any loose components. This is because the exhaust system is not securely installed.
How to fix an exhaust system leak on my Kohler 12EFKOZD Portable Generator?
If you discover an exhaust system leak in your Kohler Portable Generator, inspect the exhaust system and replace any inoperative exhaust system components. This is because there is an exhaust system leak.
What to do if my Kohler 12EFKOZD Portable Generator shuts down due to low oil pressure?
If your Kohler Portable Generator experiences a low oil pressure shutdown, check the oil level. This is due to low oil pressure shutdown.
What to do if my Kohler 12EFKOZD Portable Generator is experiencing an engine overload?
If your Kohler Portable Generator experiences an engine overload, reduce the electrical load. The cause is engine overload.
How to fix loose or corroded battery connections on a Kohler Portable Generator?
If the battery connections of your Kohler Portable Generator are loose, corroded, or incorrect, verify that the battery connections are correct, clean, and tight. The cause of this problem is that the battery connections are loose, corroded, or incorrect.
General| Brand | Kohler |
|---|---|
| Model | 12EFKOZD |
| Category | Portable Generator |
| Language | English |
Procedure to prevent accidental starting and disable the generator set safely.
Precautions regarding severe injury or death from hazardous voltage and moving parts.
Essential checks before starting the generator set to ensure safe and satisfactory operation.
Configuration and setup procedures for operating multiple generator sets in parallel.
Explains the controller's modes, start/stop functions, and system status indicators.
Procedure for immediate shutdown using the emergency stop switch and subsequent reset.
Procedure to restart the generator after a shutdown or clear a warning condition.
Reference chart for diagnosing and resolving issues related to controller display and voltage regulation.
To Next Page
