Kohler KDI 1903M - Oil dipstick on cylinder head; Air filter check

5
INFORMATION ABOUT MAINTENANCE
EN
30
5.4 Oil dipstick on cylinder head
Important
•
Before proceeding with operation, read Par. 3.2.2.
Fig 5.3 - Fig 5.4
5.5 Air filter check
Important
•
Before proceeding with operation, read Par. 3.2.2.
NOTE:
Components not necessarily supplied by
KOHLER.
1.
Release the two clasps D of the cover A.
2.
Remove the cartridges B.
3.
Clean the inside components A and C with a damp cloth.
4.
Do not use compressed air , repeatedly tap the front side E on
a flat surface.
5.
Reinstall:
• cartridges B.
•
the cover A checking the right tightness of clasps D.
Fig 5.5
5.6 Check of the radiator heat-exchanger surface
Danger
•
For safety precautions see Chap. 3.
NOTE:
Component not necessarily supplied by
KOHLER
.
Important
•
Before proceeding with operation, read Par. 3.2.2.
•
Wear safety goggles when using compressed air.
•
The radiator heat-exchange surface must be cleaned on both
sides.
1.
Check the radiator heat-exchange surface A.
2.
Clean the surface with a brush soaked in special detergent if it
is clogged.
Fig 5.6