26
5
_08
A
5.7
INFORMATION ABOUT MAINTENANCE
EN
5.7 Check coolant level
NOTE: Before proceeding with any operation on
the engine, stop it and allow it to cool.
Warning
• Presence of steam pressurized coolant danger of burns.
1.
NOTE: Component not necessarily supplied by
KOHLER.
1. Start the engine without the radiator cap A.
2. Top liquid up until the pipes inside the radiator are covered
by about 5 mm.
3. Top up if necessary.
4. Do not overfill the radiator, but leave room for the coolant
to expand.
5. Reinstall radiator cap A.
6. For engines equipped with expansion tank (B), check that
the fluid is until reaching the max level mark.
NOTE: For coolant filling see Par. 4.6.
Warning
• Before starting make sure that the radiator cap and cap, if
present, are installed correctly to avoid spillage of liquid or
vapour at high temperatures.
ED0053030120
To Next Page
Loading...
Need help?
General