Kohler KDI 3404TM User Manual

INFORMATION ABOUT MAINTENANCE
5
33
EN
Internal Communication: For internal & partner use only.
5.6 Rubber hoses check
Danger
•
For safety precautions see Chap. 3.
The check is carried out by exerting a slight deflection or bending along
the pipe and near the hose clamps. Components must be replaced if
they have clear signs of cracks, tears, cuts, leaks and do not retain a
certain degree of elasticity.
Important
•
Before proceeding with operation, read Par. 3.2.2.
•
If hoses are damaged contact an authorized KOHLER
workshop.
Fig 5.5
1.
Check that the:
•
Fuel system hoses A are intact.
•
Cooling circuit hoses B.
•
Vent system pipes C.
•
Air system ducts D.
Fig 5.6
5.7 Check coolant level
Important
•
Before proceeding with operation, read Par. 3.2.2.
Danger
•
For safety precautions see Chap. 3.
NOTE
: Before proceeding with any operation on the engine, stop it
and allow it to cool.
Warning
•
Presence of steam pressurized coolant danger of burn.
NOTE
: Component not necessarily supplied by
KOHLER
.
1.
Start the engine without the radiator cap A.
2.
Top liquid up until the pipes inside the radiator are covered by
about 5 mm.
3.
Top up if necessary.
4.
Do not overfill the radiator, but leave room for the coolant to
expand.
5.
Reinstall radiator cap A
Fig 5.7

Kohler KDI 3404TM Specifications

General

Brand	Kohler
Model	KDI 3404TM
Category	Engine
Language	English