Kohler KS595 Service Manual

13
Specifi cations
22 690 01 Rev. -- KohlerEngines.com
TORQUE SPECIFICATIONS
3,6
KS530 KS540 KS590 KS595
Electric Starter
10/24 Mounting Nut 3.8 N·m (34 in. lb.)
1/4-20 Nut 7.9 N·m (70 in. lb.)
Fixed Guard (if equipped)
Fastener 0.8 N·m (7 in. lb.)
Flywheel
M12 Retaining Screw 115 N·m (85 ft. lb.)
Fuel Line J-Clip
Fastener 6.5 N·m (58 in. lb.)
Fuel Pump Bracket
4.8 Hi-Lo Fastener 1 N·m (9 in. lb.)
Governor
Lever Nut 7.7 N·m (68 in. lb.)
Ignition
Spark Plug 27 N·m (20 ft. lb.)
Module Fastener 8.8 N·m (78 in. lb.) into new hole
3.4 N·m (30 in. lb.) into used hole
Rectifi er-Regulator Fastener 8.8 N·m (78 in. lb.)
Intake Manifold to Cylinder Head
Nuts 10.2 N·m (90 in. lb.)
Muffl er
Retaining Nuts 27.8 N·m (246 in. lb.)
Bracket Fastener 11.3 N·m (100 in. lb.)
Oil Filter Pad Pipe Plug
1/8” N.P.T.F. 8.5 N·m (75 in. lb.)
Oil Baffl e
Fastener 7.9 N·m (70 in. lb.)
Oil Passage Cover (torque sequence on page 11)
Fastener 6.5 N·m (58 in. lb.)
Oil Pump Housing
Fastener 4.8 N·m (42 in. lb.)
Oil Sentry
™
Pressure Switch 6.2 N·m (55 in. lb.)
3
Values are in Metric units. Values in parentheses are English equivalents.
6
Lubricate threads with engine oil prior to assembly.

Kohler KS595 Specifications

General

Brand	Kohler
Model	KS595
Category	Engine
Language	English