Atollspeed Touch Screen Series – Original Instructions
This document is property of Kolb Huizhou Ltd. 41
Baking chamber overheated
The oven has a safety temperature limiter to limit the maximum temperature of the baking
chamber in case of malfunction. It can also trip from vibration or cold temperature.
If this warring screen appears wait for the oven to cool down, then press the red reset button
under the roof. It has to be pressed hard because it is spring loaded. The screen will disappear as
soon as the reset was successful.
If the safety temperature limiter trips repeatedly
there might be something wrong with a
component. Do not operate the oven any more to
avoid further damage and contact your service
partner.
To Next Page
Loading...
