3. Attach Weather Stripping
In order to minimize air leaks, this unit comes with weather stripping that should be
installed as needed to plug any gaps that may be present after you have secured the air
conditioner into the window.
Inspect all of the potential air gaps around the window opening.
Cut to size and attach weather stripping as needed.
Completing Installation
Now that you have completed the installation steps, your window air conditioner is ready for use.
1. Plug the power cord into a properly grounded 3-prong outlet.
2. Press “Reset” on the LCDI plug.
3. Read the Control Panel Operations section for instructions on all modes and settings for your
air conditioner unit.
To Previous Page
Loading...
