Sealing Air Gaps
1. Install Window Sash Seal
Trim the window sash seal (foam) to the appropriate length and insert it into the gap that is
between the upper and lower window sashes.
2. Install Energy Efficient Insulation Panels
This unit comes with insulating sheets that should be installed into each of the side
curtains to maximize energy efficiency.
Start by measuring the inner width of both side curtains.
Locate the insulation panel supplied with this unit and cut each panel to the correct width.
Slide the insulation panels into each side curtain as shown below with the pattern side
facing inward (indoors).
To Next Page
Loading...
