EasyManua.ls Logo

Koldwave K6HK144BBA2ACA0 - General Safety Guidelines; Standard Safety Precautions for Use; Environmental Hazard Warnings; Electrical Cord and Plug Safety Practices

Koldwave K6HK144BBA2ACA0
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Owners Manual
K6HK144BBA2ACA0 / K6HK144BEA2ACA0
General Safety Informaon
Please read this manual carefully for correct installaon and usage. Please read all safeguards.
1. Transport and store the unit in an upright posion only. Leave unit in an upright posion for
at least 3 hours before rst use.
2. Always place the unit on an even, level surface.
3. Ensure the unit is connected to a grounded power supply of the correct rang / capacity.
4. The unit will operate between 18°C (64°F) ~ 45°C(113°F) depending on the temperature
seng.
5. DO NOT use this unit for other purposes that is not described in this instrucon manual.
6. DO NOT lt the unit.
7. NEVER unplug the unit under operaon.
DO NOT use the unit in wet environments, such as a laundry room, to avoid
the risk of electrical shock.
10. DO NOT place any foreign objects on the unit.
11. DO NOT operate the unit with wet or damp hands.
12. DO NOT allow chemical substances to come into contact with the unit.
13. DO NOT operate the unit near ammable substances or vapors such as alcohols,
pescides, gasoline, etc.
14. DO NOT unplug to turn o the unit. Always use the power switch to start and to stop the unit.
15. Always turn o the unit and unplug it before cleaning, moving or performing maintenance.
16. AVOID using adapter plugs or extension cords. If extension cord or an adapter plug is
needed , ensure they are correctly rated for the applicaon. Consult a local qualied
electrician for proper setup. Any extension cord used with this device must be rated for
a minimum of 72A.(460V)
17. DO NOT unplug the unit by pulling on the electrical cord. Keep electrical cord away from
heat sources and always completely unroll the cord to avoid overheang. If the power cord
is damaged, contact a qualied service agent, qualied electrician, or similarly qualied
person for replacement.
DO NOT operate the unit in explosive or ammable environments.

Related product manuals