8
1 battery
2 rough collimator
3 LCD display
4 keyboard panel
5 keys
6 eyepieces: use for adjusting the definition of the crosshair.
7 protecting cover of eyepieces: by releasing this cover, you can implement
the mechanical adjustment of the reticle in order to correct the optical
collimation line error.
8 data transfer port: connecting with PDA or computer.
9 reflector of circular vial
10 circular vial
11 tribrach
12 lifting handle
13 model label
14 objective lens
15 focusing hand wheel: use for focusing of digital staff.
16 power/measure key: use for instrument power ON/OFF, and measure.
17 horizontal tangent hand wheel
18 horizontal dial: use for setting the horizontal direction value of the collimating
direction to 0 or other required values.
19 leveling screws of the tribrach
To Next Page
Loading...
