K1Pro
NtripServer
This function is for Base in network mode to upload its corrections to server. And then other
rovers can connect to the server to download the corrections.
Ntrip Version: This field provides NTRIPv1.0 and NTRIPv2.0 for optional.
Access Point: This field is allowed to user-defined the correction format which base will
transfer to the server, such as HHHH_RTCM30
NtripCaster
This feature is finally realized on KOLIDA K1Pro, the receiver is equivalent to a CORS system
that it generates and broadcasts the user-defined correction for rover if K1Pro connects a static
IP address.
Port: This is the specify port for the access.
Access Point: This is mountpoint which can be user-defined.
Data Flow Config
In this page, users can freely to configure the content and the update rate of data flow that to
To Next Page
Loading...
