K1Pro
§6.2.6 Star-link & Star-Fill
Star-Link
Built on Star-link technology, KOLIDA K1Pro provides high-accuracy GNSS positioning
services via satellite or cellular delivery worldwide. It's ideal for jobs requiring the highest
accuracy. Only K1pro provides accuracy of less than 2 centimeters, helping you get your job
done fast with pinpoint accuracy.
After subscribing to it, surveyors can work almost anywhere in the world without a base station
or VRS network. ideal solution for surveying and mapping, natural resource exploration in
remote area.
SPECIAL REMIND:
Please contact with KOLIDA Team or Trimble official website to subscribe to this
feature.
Star -Link
KOLIDA Star-Fill is a new service that extends RTK positioning for several minutes when the
RTK correction stream is not available. KOLIDA Star Fill corrections are broadcast by satellite,
so they are generally available within covered areas wherever the GNSS constellations are
visible. This new function will surveyors to continue working a few minutes when radio or
mobile signal is lost in blind area. The accuracy is down to 2cm.
SPECIAL REMIND: Please run this Website for more IMU info:
https://youtu.be/VvHJN6bkUDo
§6.2.7 Radio Router
This feature is used to transfer the correction which from the reference station for the other rover
by radio, the rovers will have the same coordindates from the reference station.
NOTE: This function should be used under Rover+Network mode.
Before configuring on this function, go to “Radio Parameters” interface to check which radio
channel value and what kind of protocol are being applied, please keep in mind on this channel
To Next Page
Loading...
