Kolpak PR - Basic Setpoints; Custom tod (Time of Day) Defrost Setpoints

20
LAO = Low Alarm Offset
tAd =Temperature Alarm Delay
Adr = Mod Bus Address
Unt = Ynits for temperature display (FAH or CEL)
Custom tod (Time of Day) Defrost Setpoints
Setpoint
Description Minimum
Default Maximum
tod Time of Day 0.0 12.0 23.5
d1 Start time of day #1 0.0 dis (disabled) 23,dis (disabled)
d2 Start time of day #2 0.0 dis 23,dis
d3 Start time of day #3 0.0 dis 23,dis
d4 Start time of day #4 0.0 dis 23,dis
d5 Start time of day #5 0.0 dis 23,dis
d6 Start time of day #6 0.0 dis 23,dis
d7 Start time of day #7 0.0 dis
23,dis
d8 Start time of day #8
0.0 dis 23,dis
d9 Start time of day #9 0.0 dis 23,dis
d10 Start time of day #10 0.0 dis 23,dis
d11 Start time of day #11
0.0 dis 23,dis
d12 Start time of day #12 0.0 dis 23,dis
Note: The time of day defrost setting use military time. The first 2 digits are the hour and the 1
digit after the decimal is the minutes.