MAINTENANCE DURING THE RUNNING-IN PERIOD
3-25
MAINTENANCE DURING THE RUNNING-IN PERIOD
The following maintenance operations are to be performed in the
running-in period of the machine, in addition to the regular
maintenance steps:
AFTER THE FIRST 100 OPERATING HOURS
TRANSMISSION, CHANGE OIL AND FILTERS
OPERATING BRAKE, CHANGE OIL FILTER
AFTER THE FIRST 250 OPERATING HOURS
FUEL TANK, DRAIN WATER
FUEL FILTER, CHANGE CARTRIDGES
HYDRAULIC SYSTEM, CHANGE OIL FILTER INSERTS
AFTER THE FIRST 500 OPERATING HOURS
AXLES, OIL CHANGE
Refer to the following sections for further details on the respective
maintenance operation:
"Maintenance as required"
"Maintenance every 500 operating hours"
"Maintenance every 1000 operating hours"
To Next Page
Loading...
Need help?
General
