2-16
Operating and Control Elements
2. TRANSMISSION CUT-OFF SWITCH
WARNING
If the transmission cut-off is activated, the braking effect of
the engine is not available. This may lead to accidents while
driving on slopes or public roads!
Before driving on public roads or slopes, set the transmission
cut-off switch to its "OFF" position.
The transmission cut-off (T/M CUT-OFF) can be switched on or off with
this button.
Switch positions:
OFF: The control light of the switch is not lit.
The brake pedal can be used as a normal brake.
ON The switch control lamp is lit.
If the brake pedal is used for braking, the transmission is
automatically set to its neutral position. When the brake is released,
the machine starts to drive, if a gear has been selected.
NOTE
The transmission cut-off function is only effective in the first
or second gear.
The transmission cut-off should be set to "ON" during normal
operation.
3. SWITCH FOR FRONT WORKING LIGHTS
CAUTION
The front working lights may blind oncoming traffic!
Switch off the front working lights before driving on public
roads.
It is required to switch on the main headlights before the front working
lights can be switched on. Press the working lights switch once to switch
on the front working lights; the relevant control light lights up. Press the
switch again to switch off the front work lights.
4. SWITCH FOR REAR WORKING LIGHTS
CAUTION
The rear working lights may blind following traffic!
Switch off the rear working lights before driving on public
roads.
It is required to switch on the main headlights before the front working
lights can be switched on. Press the working lights switch once to switch
on the rear working lights; the relevant control light lights up. Press the
switch again to switch off the rear work lights.
To Next Page
Loading...
Need help?
General
