2-23
Operating and Control Elements
4. LOCKING LEVER FOR THE WORK HYDRAULIC SYSTEM
WARNING
Unintentional lowering of the bucket may lead to severe
accidents!
Before you start maintenance operations: Turn the locking
lever for the work hydraulic system into position '1'. The
locking lever for the work hydraulic system will then be
without function. In addition, lower the bucket onto the
ground and switch off the engine, before leaving the driver's
cab.
The work hydraulic system is secured against unintentional operation
with this locking lever.
Lever position: 1 Locking lever secured
2 Operating position
To Next Page
Loading...
Need help?
General
