What causes low supply air temperature in Komfovent Controller?
If you are experiencing low supply air temperature with your Komfovent Controller, the heating equipment may have failed to operate, or its capacity may be insufficient. Check the heating equipment.
Why does my Komfovent C5 show a service time message?
If your Komfovent Controller unit has been in continuous operation (without breaks) for 12 months, a periodic inspection message will appear. After disconnecting the unit from the power supply, it is necessary to carry out a periodic inspection of the unit, i.e., to check the condition of the heat exchanger, the heater, and fans.
What causes low return water temperature in Komfovent C5?
If the return water temperature of the heater in your Komfovent Controller has dropped below the permissible limit, check the status and operation of the circulation pump, heating system, and mixing valve actuator.
What causes VAV calibration to fail in Komfovent C5 Controller?
A VAV calibration failure in your Komfovent Controller can occur if the pressure sensors are not connected or are broken. Check the sensor connections or replace the sensor.
What to do for evaporator air temperature sensor failure in Komfovent C5?
If you're experiencing an evaporator air temperature sensor failure in your Komfovent Controller, check the connections of the sensor or replace it, as it might not be connected or could be broken.
What to do for water temperature sensor failure in Komfovent C5?
If you experience a water temperature sensor failure with your Komfovent Controller, check the sensor connections or replace the sensor, as it may not be connected or may be broken.
What to do for exhaust air temperature sensor failure in Komfovent Controller?
If you have an exhaust air temperature sensor failure in your Komfovent Controller, check the sensor connections, as it may be disconnected or blocked.
What to do for outdoor air temperature sensor failure in Komfovent Controller?
If the external air temperature sensor is not connected or broken in your Komfovent Controller, check the connections of the sensor or replace the sensor.
What to do for extract air temperature sensor failure in Komfovent Controller?
If you're facing an extract air temperature sensor failure in your Komfovent Controller, it could be due to the discharged air temperature sensor not being connected or being broken. Check the sensor connections or replace the sensor.
What to do for supply air temperature sensor failure in Komfovent C5 Controller?
If you are experiencing a supply air temperature sensor failure in your Komfovent Controller, it may be because the sensor is not connected or is broken. Check the connections of the sensor or replace the sensor.
Connects unit sections using specified cables and wires according to wiring diagrams.
Details on connecting the unit to the power supply, including voltage requirements and grounding.
Connects external control elements to the controller box terminals for various functions.
Guidance on mounting supply air and water temperature sensors in ducts and pipes.
Specifies environmental conditions and mounting requirements for the control console.
Instructions for connecting the control panel to the unit's controller box.
Overview of the air handling unit's control system components and their functions.
Explanation of symbols and displays on the control panel for unit status and parameters.
Details on main unit parameters displayed on the control panel, including temperature, airflow, and quality.
Describes the available operation modes (Comfort, Economy, Special, OFF) and how to select them.
The main menu for accessing unit operations, settings, and information.
Access to alarms, operation counters, efficiency status, and detailed sensor readings within the menu.
Configuration of various unit functions like air quality control, operation on demand, and climate settings.
Planning unit operation via weekly programs and annual holiday schedules.
User-configurable settings for time, date, units, connectivity, and panel appearance.
Remote management of air handling units through a web interface accessible via a network.
Advanced control methods for water coils, evaporators, and multi-stage cooling systems.
Guidance on identifying and resolving unit malfunctions using error codes and detailed guidance.
General| Brand | Komfovent |
|---|---|
| Model | C5 |
| Category | Controller |
| Language | English |
To Next Page
