What causes heat exchanger icing in my Komfovent C5 Controller?
V
Victoria StoneAug 25, 2025
Heat exchanger icing in your Komfovent Controller may form under a low outdoor temperature and high room humidity. Check the operation of the rotation heat exchanger drive or the air bypass damper of the plate heat exchanger.
E
Eric RiveraAug 23, 2025
What to do if the electric heater is off in my Komfovent C5 Controller?
T
Timothy FrancoAug 23, 2025
If the electric heater is off in your Komfovent Controller because the heater is disconnected due to too low air volume, the protection resets automatically once the heater cools down. It is recommended to increase the ventilation intensity level.