ADJUSTING RING LEVEL VOLUME
Select MENU > SETTINGS > RING LEVEL.
Select your choice and press OK to conrm.
There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone ashes when an
incoming call is received.
ADJUSTING THE FLASH/R PULSE DURATION
The Flash/R pulse (Register recall) is used to request a new line from the PBX. Different
countries and PBXs may require different durations for activating the Flash/R pulse.
Duration requirements should be specied in the technical data for the PBXs.
Select MENU > SETTINGS > FLASH.
Select your choice and press OK to conrm.
Examples of suitable settings are:
100 ms – Scandinavia, Europe, Siemens HiPath
300 ms – Germany, France, Israel
500 ms – USA
SELECTING CALLER ID STANDARD
Konftel 300 needs to be congured to match the Caller ID standard in your country.
Note that in some cases even individual states/provinces within a country use different
standards. The table below is a guideline for choosing the correct setting. If the caller
ID is not working properly, select another setting or contact your telephone service
provider for further information.
Caller ID standard Country
Bellcore (Telcordia) Canada (usually), USA, Australia, New Zealand,
China, Hong Kong, Singapore
ETSI Austria, Belgium, Czech Republic, France, Germany, Italy,
Luxemburg, Norway, Poland, Spain, Slovenia, Switzerland,
Turkey, South Africa, Taiwan
BT (British Telecom) United Kingdom
DTMF Denmark, Finland, Greece, Iceland, Netherlands, Portugal,
Sweden, China, India, Saudi Arabia, Brazil, Uruguay
Select MENU > SETTINGS > CALLER ID.
Select your choice and press OK to conrm.
SETTINGS
To Next Page
Loading...
