CONNECTIVITY
CONNECTION PRIORITY
Konftel 70 supports personal computer or Bluetooth
®
host connection to enhance
the sound quality. OmniSound
®
provides automatic echo cancellation and
eliminates distracting background noise.
To make a Voice over IP (VoIP) call, you can use an applicable VoIP software or
listen to music from your personal computer or a Bluetooth
®
host. The computer
normally activates the speaker in Konftel 70, if no other software that can use the
microphone is running. Here, Konftel 70 functions as a powerful speaker to play
music. When you make or take a call, the music mode automatically turns off, and
Konftel 70 enables the microphone and acts as a conference unit.
For several activities, Konftel 70 handles the connections in line with its predefined
connection priorities. The connection priorities are the following:
Bluetooth
®
calls
USB calls
Bluetooth
®
audio streaming
USB audio streaming
CONNECTION TO A COMPUTER
Konftel 70 performs as a high-quality conferencing equipment with OmniSound
®
,
when you connect it to your computer. Unlike standard computer speakers and
microphones, Konftel 70 provides full-duplex (two-way audio), efficient echo
cancellation, and noise reduction.
The computer identifies Konftel 70 as an Echo Cancelling Speakerphone. The
communication software usually leaves the audio processing to Konftel 70,
resulting in better sound quality.
If you play music or other one-way audio streams, Konftel 70 switches
automatically to the music mode.
OmniSound
®
performs over the full audio bandwidth (the microphone:
100-7000 Hz, the loudspeaker: 100-20000 Hz). However, some factors can
limit the sound quality, depending on the equipment in the network and the
equipment used by other call participants.
14
To Next Page
Loading...
