Konftel 70 - Putting a Call on Hold; Ending Calls

Establish the Bluetooth
®
connection between your Bluetooth
®
host and Konftel 70.
On Konftel 70, press the Bluetooth button.
Optional: Press the Bluetooth button again to transfer the call back to your
Bluetooth
®
host.
PUTTING A CALL ON HOLD
Use this procedure to put an ongoing call on hold.
Transfer an ongoing call from your Bluetooth
®
host to Konftel 70.
To put the call on hold, press the Answer button.
The LEDs on Konftel 70 start flashing red.
To continue the call, press the Answer button again.
ENDING CALLS
Use this procedure to end an active call from your Konftel 70.
Make sure you have an active call.
On Konftel 70, press the Hang Up button.
The green LEDs on the Konftel 70 turn off.
Optional: End the call from your computer or Bluetooth
®
host.
SPEAKERPHONE OPERATIONS
19