Konftel 70 - Bluetooth Connection

Connecting to a computer
Connect Konftel 70 to a computer to use the speakerphone as a high-quality
conferencing equipment.
The computer operating system automatically selects Konftel 70 as a speaker and
microphone. If your computer does not automatically select Konftel 70 as an audio
device, manually select Konftel 70 in your computer settings.
Connect Konftel 70 to the computer using a suitable USB cable.
Cable retention
The Konftel 70 device has a retention mechanism for connection of the USB and
power cables. When pulling, the cable retention mechanism prevents
disconnection of the USB and power cables. The cable retention feature ensures
that data communication between Konftel 70, the computer, and the device battery
charging does not abruptly end.
BLUETOOTH CONNECTION
Konftel 70 supports connection to a Bluetooth
®
host. You can connect the
speakerphone to a mobile phone, tablet, and computer over Bluetooth
®
. For that,
you must enable Bluetooth
®
in the Bluetooth
®
host settings.
The device can transmit audio over Bluetooth
®
in the following ways:
• Two-way transmission optimized for speech
• One-way transmission (A2DP) with higher audio bandwidth, optimized for
music
Konftel 70 supports both options.
OmniSound
®
performs over the full audio bandwidth (the microphone:
100-7000 Hz, the loudspeaker: 100-20000 Hz). However, limitations in the
telecommunications networks and Bluetooth
®
technology reduce the
bandwidth partially, that it compresses the sound and affects the sound quality.
Bluetooth pairing and connection
You must pair two devices before they can communicate over Bluetooth
®
. You can
do it in different ways depending on whether your Bluetooth
®
host supports the
simplified pairing using NFC.
NFC reading distance between devices is around two centimeters.
CONNECTIVITY
15