You can pair a maximum of eight devices with Konftel 70. To pair a new host that
already has eight other paired devices in the list, Konftel 70 deletes the oldest
pairing information.
Pairing and connecting with NFC
You can pair Konftel 70 with your Bluetooth
®
host using the NFC feature.
Enable NFC on your Bluetooth
®
host.
Unlock the screen of your Bluetooth
®
host.
Hold the Bluetooth
®
host next to the NFC tag on Konftel 70. The Bluetooth
®
LED on Konftel 70 flashes blue.
You might need to bring the Bluetooth
®
host closer to Konftel 70 to make
contact over NFC. The connection range is about two centimeters.
The Bluetooth
®
host and Konftel 70 are paired and connected.
After establishing the pairing, the Bluetooth
®
LED becomes steady blue.
Pairing without NFC
If your Bluetooth
®
host does not support the NFC feature, you can still connect it
to Konftel 70 over Bluetooth
®
.
Turn on Bluetooth
®
on your Bluetooth
®
host.
On Konftel 70, press and hold the Bluetooth button for two seconds.
Konftel 70 becomes discoverable for other Bluetooth
®
hosts.
The Bluetooth
®
LED on Konftel 70 flashes blue.
In the list of devices on your Bluetooth
®
host, select Konftel 70 and confirm the
pairing.
The devices pair and automatically connect. On your Bluetooth
®
host, you get
the connection confirmation.
The Bluetooth
®
LED on Konftel 70 turns steady blue.
After 60 seconds in the pairing mode with no pairing established, Konftel 70
returns to its regular operation mode. In this case, repeat the pairing procedure.
Reconnecting already paired devices
After successful pairing, you do not need to repeat pairing on subsequent
connections.
CONNECTIVITY
16
To Next Page
Loading...
