Kongsberg Simrad Mk3 - Connecting the USB Cable between the Operating Panel and the Processor Unit

110-0001063/A
17
ConnectingtheUSBcablebetweenthe
OperatingPanelandtheProcessorUnit
TheOperatingPaneloffersallnecessarycontrolfunctionsfornormaloperation.The
Mk3OperatingPanelisconnectedtotheProcessorUnitwithaUSBcable.Adedicated
powersupplyunitisnotrequired.
Prerequisites
Thesonarsystemisturnedoff.Neithertoolsnorinstrumentsarerequired.
Context
ThisisastandardcommercialUSBdatacable.OneendoftheUSBcableisttedwith
aquadraticUSBconnector(B-plug).TheotherendisttedwitharectangularUSB
connector(A-plug).
Thiscableisincludedinthedelivery.Thecablelengthisapproximatelytwometres.If
youneedalongercableyoumustbuyitlocally.
Procedure
1LocateavacantUSBsocketontherearpaneloftheProcessorUnit.
2ConnecttheUSBcablefromtheProcessorUnittotheOperatingPanel.
3Securethecablesothattheconnectionscanwithstandthevibrationandmovements
ofthevessel.
Relatedtopics
Cablelayoutandinterconnections,page16
Cablelayoutandinterconnections