Making Single-Sided Copies from Double-Sided Originals (2
1)
(continued)
3-23
5. Press [START].
The machine starts to scan originals, then prints simplex copies when they are ready for
output.
Press [STOP] to suspend the scanning or printing job.
When the finisher / paper exit / inner tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-1, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Copy Size
Fold/
Fold&Stitch
Output with
Inner Tray
To Next Page
