Konica Minolta 9760 - Page 92

92
KONICA FAX 9760
|
4 Press the Yes § key.
a. The first time you use this feature, the display reads:
REMOTE LIST NO. [ ]
ENTER 01-99
Using the numerical keypad, enter the 2-digit relay
group number for the group you want to fax to.
b. If you have already used this feature, the display
shows:
REMOTE LIST NO. [XX]
where XX is the last list number you entered.
If the list number is correct, go to step 5.
If you want to fax to a different list, press the No © key.
Then use the numeric keypad to enter the number of
the list you want to use.
5 Press the Yes § key. The display shows
SELECT LOCATION.
6 Select the location of the relay key station.
Refer to the instructions below.
To select a One Touch key, press the One Touch key (lift
the main One Touch keypad to access One Touch keys
16–30).
To select an Auto Dial number, press the Auto Dial key,
then enter the two-digit Auto Dial number on the numeric
keypad.
To select a number dialed on the numeric keypad, dial as
you would on a normal telephone.
7 Press the Start key. Your fax machine begins to connect to
the relay key station and transmit the fax to be relayed to
the selected group.