EasyManua.ls Logo

Konica Minolta AeroDR System 2 - Page 61

Konica Minolta AeroDR System 2
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.1 Startup and shutdown
61
Chapter 3
AeroDR Interface Unit
Turn the power switch of the AeroDR Interface
Unit on, and conrm that the LED (green) lights.
Power switch
LED (green)
AeroDR Interface Unit2
Turn the power switch of the AeroDR Interface
Unit2 on, and conrm that the Detector Connec-
tion LED (green) and Generator Interface LED
(green) light.
Power switch
Detector Connection LED (green)
Generator Interface LED (green)
HINT
•••••••••••••••••••••••••••••••••••••
It takes time for the Generator Interface LED (green)
to light.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
Hub
Reference
•••••••••••••••••••••••••••••••••••••
When using a general-purpose hub, refer to its opera-
tion manual.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
Detector Interface Unit
When the power switch of the Power Sup-
ply Unit is turned on, power is supplied to the
Detector Interface Unit, and the LED (green) on
the Detector Interface Unit will light.
When using the DI Unit AC Adapter, conrm that
the Detector Interface Unit is turned on when
the power plug is connected to a wall outlet and
the LED (green) lights.
LED (green)
IMPORTANT
•••••••••••••••••••••••••••••••••••••
For power supply through PoE, supply the power from
the Power Supply Unit.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
When DR Detector is connected, the LED (blue) is on.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
Detector Interface Unit 2
When the power switch of the Power Sup-
ply Unit is turned on, power is supplied to the
Detector Interface Unit 2, and the LED (green)
on the Detector Interface Unit 2 will light.
LED (green)
IMPORTANT
•••••••••••••••••••••••••••••••••••••
For power supply through PoE, supply the power from
the Power Supply Unit.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
When DR Detector is connected, the LED (blue) is on.
•••••••••••••••••••••••••••••••••••••••••••••••••••••

Table of Contents

Related product manuals