Konica Minolta AeroDR System 2 User Manual

3.4 Registration and selection of the DR Detector
84
3.4.2 Registration with AeroDR
Battery Charger2
To register the DR Detector in the AeroDR Battery
Charger2, follow the procedure below.
1
Make sure that all the devices in the destina-
tion exposure room are usable.
2
Insert the DR Detector into AeroDR Bat-
tery Charger2 in the destination exposure
room.
• Registration process will start.
Exposure
side
3
Once the registration is completed, a
buzzer will sound on the AeroDR Battery
Charger2, and the LED (green) will change
from slow ashing to lit.
LED (green)
4
Conrm that the DR Detector icon is dis-
played on the image processing control-
ler.
HINT
•••••••••••••••••••••••••••••••••••••
• Charging will also start when the DR Detector is in-
serted into the AeroDR Battery Charger2, and the
AeroDR Battery Charger2 LED (blue) will light or ash.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
3.4.3 Registration with the
wired cable
To register the DR Detector by connecting the wired
cable to the wired connection connector, follow the
procedures below.
1
Make sure that all the devices in the desti-
nation exposure room are usable.
2
Securely connect the wired cable to the
wired connection connector on the DR
Detector.
• Registration process will start.
or
3
Conrm that the DR Detector icon is dis-
played on the image processing control-
ler.

Konica Minolta AeroDR System 2 Specifications

General

Brand	Konica Minolta
Model	AeroDR System 2
Category	Medical Equipment
Language	English