Konica Minolta AeroDR System 2 - Page 66

3.1 Startup and shutdown
66

AeroDR Access Point
• When the Power Source Device is turned off,
power supply to AeroDR Access Point is termi-
nated. The LED (umber) on the AeroDR Access
Point will turn o󰀨.
LED (umber)

Access Point
Reference
•••••••••••••••••••••••••••••••••••••
• When using a general-purpose access point, refer to its op-
eration manual.
•••••••••••••••••••••••••••••••••••••••••••••••••••••

Image processing controller
• Turn the power switch of the image processing
controller o󰀨, and shutdown the image process-
ing controller.